
Add to Cart
Foggy/ Spraying System
Atomizing cooling system works as per the principle that water can adjust the nature climate. Water will enter high pressure nozzle after purified by the filter and compressed by high-pressure pump then spray in atomization status(25-30 μm/granule). Atomizing granule fully mix with hot-air while following circulating wind, and absorb large amount of heat. At the same time, evaporated atomizing granule accelerate air flow. Temperature of the house will go down immediately thereby. In hot summer, if the temperature in the house is over 40°C, this system can lower the temperature by 3-8°C in a few minutes.
Main characters
● Well-know brand motor with long life.
● Water source enter pump group after going through multi-filters with Honeycomb Type filter corn, at 50μm/hole.
● There are three foggy lines in standard house, and each nozzle with two spraying hole every 3m to ensure spray into every corner.
● Side pipe is anti-high pressure PE pipe and able to endure high pressure of 100kg, anti-corrosive.
● Main pipe is made of anti high pressure copper tube, from which two ways are divided, to ensure homogeneous atomizing granule everywhere under identical spraying pressure.
● Special copper nozzle, with flat stainless steel chips.
● Function: Cooling, Humidification, Dedusting and Disinfection.
Technical Parameter:
Remark: We can design and produce products according to customer’s requirements.